Decompactors Dante Macchine
DELTA series
The Delta series decompactors act on the ground avoiding the formation of clods.
The construction of the Delta frame favors a greater distance between the anchors and easier dump of the residue.
The series is available in two versions: Delta, the mounted model, and Delta R, the trailed machine
Delta series decompactors: technical characteristics
Delta R decompactors
- Anchors arranged in the shape of a DELTA
- The distance between the anchor can vary from 55 to 70 cm
- Working depth: up to 45cm
- A cutting paker roller dia. 600 mm is applied to the rear
- Rear row of mixing discs mounted on independent supports
- Two-point hitch
- All usury parts are made of anti-usury steel
Optional: front residue cutting kit
Delta decompactors
- Anchors arranged in the shape of a DELTA
- The distance between the anchor can vary from 55 to 70 cm
- Working depth: up to 45cm
- A cutting paker roller dia. 600 mm is applied to the rear
- 3th category three-point hitch
- All usury parts are made of anti-usury steel
model | working width | transport width | Weight | HP | N. ANCHOR | WORKING DEPTH |
|---|---|---|---|---|---|---|
DELTA 400 | 4000 mm | 2500 mm | 4900 kg | 350-400 | 7 | 45 cm |
DELTA 500 | 5000 mm | 2500 mm | 5650 kg | 450-500 | 9 | 45 cm |
model | working width | transport width | Weight | HP | N. ANCHOR | WORKING DEPTH |
|---|---|---|---|---|---|---|
DELTA | 5000 mm | 2500 mm | 4225 kg | 450-500 | 9 | 45 cm |
Request information on Delta series decompactors
If you need further information on the Delta series decompactors or on other Dante Macchine products, contact us by filling out the form. You will be contacted by our staff.
